Board foot calculator
Build a lumber buying worksheet. Compare finished volume with the stock sizes and prices quoted by your supplier.
Board size 1
Add 0–100% to allow for offcuts and defects. This adds purchase volume; it does not calculate cutting yield or whole boards.
Lumber shopping list
| Size | Actual / billed thickness | Width × length | Count | Quote |
|---|---|---|---|---|
| 1 | 0.75 in / 1 in | 6 in × 96 in | 1 | Not quoted |
- Actual board feet
- 3.00
- Billed board feet
- 4.00
- Quoted subtotal (partial)
- —
1 of 1 board sizes have no price. Add every quote to calculate the full cost.
Purchase planning volume with 0% extra: 4.00 board feet.
Budget with the same allowance: Add missing prices. This assumes the same mix of stock and prices; it is a planning estimate, not a supplier quote.
Reading a lumber quote
A board foot is 144 cubic inches. A linear foot measures 12 inches of board length, regardless of width or thickness. Use the basis stated on the supplier’s quote; a linear-foot price only applies to the quoted cross-section.
4/4 means one inch of rough stock thickness; 5/4 means 1¼ inches. A finished ¾ in × 6 in × 96 in board contains 3 board feet; priced as 4/4 stock at $8 per board foot, it bills as 4 board feet and costs $32.
S2S means surfaced on two sides; S4S means surfaced on four sides. Surfacing reduces dimensions. Enter the actual thickness separately from the billed stock thickness, using the width and length your supplier quotes.
Metric entry uses millimetres for thickness and width, and metres for length. Prices remain dollars per board foot or linear foot. Confirm width, length, rounding, minimum charges, tax, delivery, and availability with your yard before ordering.